UL 1641

Please note: All interim revisions for this edition available at time of your purchase will be included.

Installation and Classification of Residential Burglar Alarm Systems
UL 1641
1 Scope
1.1 These requirements apply to the installation of alarm protection products and devices connected to form a residential burglar alarm system.

1.2 These requirements include the criteria for classifying the extent of alarm protection at an individual residence as either basic protection or expanded protection.

1.3 A residential burglar alarm system may or may not have a remote connection to a central station, proprietary station, residential monitoring station, or police station. If there is a remote connection, the signal receiving location shall comply with the requirements in the following standards, as applicable:

• a) The Standard for Central-Station Alarm Services, UL 827;
• b) The Standard for Proprietary Burglar Alarm Units and Systems, UL 1076; and
• c) The Standard for Police Station Connected Burglar Alarm Units and Systems, UL 365.

1.4 Alarm systems covered by these requirements have a sounding device that may be mounted indoors or outdoors.

1.5 These systems comply with the requirements for Class 2 remote-control and signal circuits as defined by Article 725 of the National Electrical Code, NFPA 70. Systems using both fire and burglary protection operate as defined by Article 760 of the National Electrical Code, NFPA 70.

1.6 The requirements assume that standard telephone operating practices may be used for leased or other lines connecting to a police or central station as defined by Article 800 of the National Electrical Code, NFPA 70.