BS 1363-3:2016

BS 1363-3:2016 specifies requirements for adaptors having insulatingsleeves on the line and neutral plug pins and suitable for use with socket-outletsconforming to BS 1363-2:2016, with particular reference to safety in normal use.Adaptors specified in this part of BS 1363 are intended for household,commercial and light industrial purposes. The adaptors are suitable for theconnection of portable appliances, sound-vision equipment, luminaires, etc., ina.c. circuits only, operating at voltages not exceeding 250 V r.m.s. at 50 Hz.Adapters incorporating electronic components detailed in Annex H are includedwithin this part of BS 1363.This standard also applies to shaver adaptors which have the earth pin replacedwith a similarly dimensioned protrusion made of insulating material designatedas an insulated shutter opening device (ISOD) designed to operate the shuttermechanism of a socket-outlet conforming to BS 1363-2:2016.Adaptors conforming to this standard are shuttered and therefore do notrequire the use of additional means to shield the current-carrying contacts whenno plug is present in the adapter socket-outlets.Assemblies comprising a plug and one or more portable socket-outletsconnected together by a flexible cable are not considered to be adaptorsaccording to this part of BS 1363. Devices incorporating, transformers, timers,thermostats or other control means are outside the scope of this part ofBS 1363.NOTE 1 The titles of the publications referred to in this standard are listed in thebibliography.NOTE 2 In order to maintain safety and interchangeability with plugs andsocket-outlets it is necessary that these products conform to the requirements ofClause 9, Clause 12 and Clause 13, however their body outline need not be limitedat a distance of 6.35 mm from the plug engagement surface.An adaptor is mechanical by nature of construction. The product is thereforeimmune from electromagnetic interference.An adaptor that does not incorporate electronic devices does not emitintolerable electromagnetic interference since significant electromagneticdisturbances are only generated during insertion and withdrawal which are notcontinuous.This British Standard does not cover travel adapters.NOTE 3 Attention is drawn to BS 8546:2016, which covers travel adapters.Cross References:BS 219:1977BS 546:1950BS 638-4BS 646:1958+A2:2013BS 1362:1973BS 1363-1:2016BS 1363-2:2016BS 1363-4:2016BS 1363-5:2016BS 2572:1990BS 2870:1980BS 4573:1970BS 4662:2006+A1:2009BS 4800:2011BS 6004:2012BS 6007BS 6500 BS 7211BS 7919BS 8546:2016BS EN 10270-1:2011BS EN 50075:1991BS EN 50525-1:2011BS EN 50525-2-11:2011BS EN 50525-2-21:2011BS EN 50525-2-22:2011BS EN 50525-2-71:2001BS EN 60112:2003+A1:2009BS EN 60664-1:2007BS EN 60664-3:2003+A1:2010BS EN 60664-5:2007BS EN 60669-2-1:2004+A12:2010BS EN 60695-10-2:2014BS EN 60695-2-11:2014BS EN 60893-3-4:2004+A1:2012BS EN 60950-1:2006+A2:2013BS EN 61000-6-1:2007BS EN 61000-6-3:2007+A1:2011BS EN 61032:1998BS EN 61140:2016BS EN 61180-1:1995BS EN 61558-2-6:2009BS EN 61558-2-16:2009+A1:2013BS EN 61643-311:2013BS EN 61643-321:2002BS EN 61643-331:2003BS EN 62368-1:2014BS EN 62680-1-1:2015BS IEC 61051-2:1992+A1:2009IEC 60038IEC 60083IEC 60417-DBThe Plugs and Sockets etc. (Safety) Regulations 1994Replaces BS 1363-3:1995+A4:2012 which remains current.