IEEE 515.1-2005

This standard provides test criteria to determine the suitability of heating devices and fittings that are used for commercial applications. The standard also includes detailed recommendations for the design,installation, and maintenance of electrical resistance heat tracing in these applications. Commercial applications include installations both inside and outside commercial business buildings, such as office buildings, hospitals, and airports. Typical applications include freeze protection of water pipes; temperature maintenance of hot water piping and other lines and tubing; protection of sprinkler systems; roof, gutter, and pavement deicing; and other applications as shown in Table 1 in 4.1. Commercial applications involving hazardous (classified) locations shall also meet the relevant hazardous location requirements in IEEE Std 515 as well as any other applicable codes and standards. The provisions of this standard should ensure that adequate material temperatures are maintained and that electrical, thermal, mechanical, and water-exclusion durability are provided to the heat tracing system. In addition, it should provide that under normal use, the products will exhibit long-term performance reliability without damage to the user or surroundings. This standard is a supplement to those provisions outlined in National Electrical Code(R) (NEC(R)) (NFPA 70), Articles 426 and 427. Revision Standard - Superseded. Specific test requirements for qualifying electrical resistance heat tracing for commercial service. A basis for electrical and thermal design is included. Heating device characteristics are addressed, and installation and maintenance requirements are detailed. Recommendations and requirements for unclassified heating device applications are provided.